Showing posts with label Guideway. Show all posts
Showing posts with label Guideway. Show all posts

90-Foot Turn

The extraordinary strength and torsional rigidity of the monobeam's triangular section allows this pristine appearance. The ability to increase beam depth some 6 inches -- in sync with a small rise of the outrigger -- helps, too.

Expansion Joint

Beams arrive at the site with power conductors and rails already installed. But thermal expansion/contraction will shift these two beams relative to each other, and alignment can't be absolutely perfect. A small insert, from A to A, provides for that and minimizes wheel-click at this joint. This also details the beam-to-column interface.

Column & Base

A concrete pad atop its foundation (not shown) rises 6 to 18 inches above the median. The prefabricated column is of welded steel plate with a cast-steel base. An optional concrete "Planter" (see see photos below) can fortify the base for extra protection against speeding trucks.

Let It Snow!

Click to enlarge
The guard up there collects typical snow and ice, which can remain until it melts. (Birds or twigs can't mess up the rails, either.) In a heavy winter storm, a little snow or ice will try to collect above the lower rail, but the customary practice of running a train every half-hour during the night can keep the rail clear. Decades of experience prove that ice can't degrade the steel-wheel-to-rail interface, even on a considerable grade; it just cracks away and leaves the railhead extra clean. Expected result: service as always during storms with virtually no maintenance personnel needed.

Page From "Urban Rail In America"

Mouton's Model For APTA Conference

William J. Mouton, Tulane professor of Architecture, joined our effort in 1988; I contacted him because he was celebrated for showing how his deep foundation design could allow New Orleans to have skyscrapers just like other cities. Soon he and his students built this scale model, a hit near the front door of a national transit conference. Later, Bill designed and built a model of our station, shown elsewhere.